Studies on Amorphous Alloy Dispersed Aluminium Matrix Composite Prepared by High Pressure Torsion


  •  S. Hembrom    
  •  B. N. Roy    
  •  N. Khobragade    
  •  D. Roy    

Abstract

Aluminium-based composite reinforced with Cu base amorphous alloy dispersed composite was prepared by means of high pressure torsion between a powder mix of aluminium and amorphous Cu base alloy. The X-ray diffraction pattern of powdered and consolidated composites shows the aluminium phase while the thermal stability of the amorphous alloy was studied with the aid of differential scanning calorimetry (DSC). The microstructural feature of the composite through scanning electron microscope reveals the well-distributed reinforcements in the host aluminium matrix. The hardness measurement on the as prepared composites shows significant increase in hardness with increase in reinforced amorphous alloy. Wear property of the synthesized composites were measured by using ball on plate wear tester which shows increase in wear resistance with increase in reinforced amorphous alloys.



This work is licensed under a Creative Commons Attribution 4.0 License.
  • ISSN(Print): 1927-0585
  • ISSN(Online): 1927-0593
  • Started: 2012
  • Frequency: semiannual

Journal Metrics

The data was calculated based on Google Scholar Citations

Google-based Impact Factor (2021): 0.52
h-index (December 2021): 22
i10-index (December 2021): 74
h5-index (December 2021): N/A
h5-median (December 2021): N/A

Learn more

Contact