Dynamic Excess Free Energy Revealed from Larson–Miller Constant during Creep of Martensitic Steel


  •  Manabu TAMURA    

Abstract

A creep parameter, dynamic excess free energy ∆Gex , is introduced directly from creep data without any adjustable parameters as 2.3RT  times (the calculated Larson–Miller constant minus the experimentally obtained one), where R  and T  have usual meanings. ∆Gex  is closely related to dynamic recovery and precipitation. Creep data for 8 kinds of steels of Grades 91, 92, and122 are classified into 257 groups and the ∆Gex s is calculated for each group. Correlations between ∆Gex  and creep variables are thoroughly investigated. Among these the relationship between ∆Gex  and the activation energy Q  with the latter on the horizontal axis is characteristic and behaves like tracing an eighth rest backwards from the start of creep. During the first and second stages of the ∆Gex-Q  relationship, precipitation along the boundaries of the hierarchical martensitic structure and the coarsening of precipitates and subgrains, respectively, occur dynamically, although the first stage is absent under high-temperature and long-term creep conditions. During the final stage leading to rupture, damages caused by nonequilibrium vacancies progressively accumulates and ∆Gex  increases without exception. Both the hierarchical structure and the high dislocation density cause inhomogeneity in the martensitic steels and consequently result in a pronounced increase in the ∆Gex  during creep. ∆Gex  can be calculated nondestructively and, therefore, can be used to monitor microstructural changes during creep. Furthermore, the local minimum value of ∆Gex  between the second and third stages is highly correlated with the estimated rupture strength at 600 ℃  for 1E5 h. Therefore, ∆Gex  can be usefully applied to for the estimation of creep life or residual creep life.



This work is licensed under a Creative Commons Attribution 4.0 License.