Abstract

Chromium (Cr) is an essential element in plant and animal metabolism, but high accumulation of this metal ion in soil and water from industrial sources has caused concern. This study investigated the removal of Cr (VI), the most mobile and toxic species, using coffee husk biosorption from aqueous solutions. Coffee husk was characterized using Brunauer Emmett Teller (BET) and Fourier Transform Infrared (FTIR) analysis. The effects of pH, adsorbent dosage, contact time, effect of KNO3 concentration, and temperature during the adsorption of Cr (VI) were studied. Infrared spectral studies revealed the presence of functional groups, such as hydroxyl and carboxyl groups, which facilitated the biosorption of Cr (VI). The maximum adsorption capacity reached 87 % at pH~2. Moreover, maximum adsorption capacity of Cr (VI) onto coffee husk 0.660 mg g-1 was recorded after 60 min of using 40 mg L-1 of Cr (VI) with no addition of KNO3 at 40 0C. The kinetic data followed the pseudo-second-order model with regression coefficients R2 = 0.99. The equilibrium data for the adsorption of Cr (VI) onto coffee husk biosorption were fitted into Langmuir and Temkin adsorption isotherm models with R2 = 0.98 corresponding to each model. Thermodynamic studies showed that the coffee husk-Cr (VI) adsorption system was spontaneous and endothermic because negative and positive values were obtained for ΔG° and Δ°H, respectively. The coffee husk was applicable to remove Cr (VI) after three recycling and using different environmental water samples. In conclusion, coffee husk can be used effectively as an adsorption system for Cr (VI) at different polluted sites.

This work is licensed under a Creative Commons Attribution 4.0 License.