Finite-element Analysis and Optimization for the Column of Numerically Controlled Triaxial Deep Hole Drilling Machine

Dezhong Kong, Jingfeng Shen, Baohui Li

Abstract


Solidworks is selected for modeling the 3D-solid structure of the deep-hole drilling machine. Based on parametric modeling and structural optimization theory, the parametric model of column is established. The equivalent stress and maximum principal stress on the column are solved by FEA. The two parameters (column thickness and inner rib thickness) are included. According to the design variables, the main target method is applied for the purpose of optimizing the weight of the column (Chen, Ding, & Guo, 2010). Topology optimization is used to determine the location of the sand holes by ansys software with density method.

Full Text: PDF DOI: 10.5539/mer.v2n1p107

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

Mechanical Engineering Research   ISSN 1927-0607 (Print)   ISSN 1927-0615 (Online)

Copyright © Canadian Center of Science and Education

To make sure that you can receive messages from us, please add the 'ccsenet.org' domain to your e-mail 'safe list'. If you do not receive e-mail in your 'inbox', check your 'bulk mail' or 'junk mail' folders.

------------------------------------------------------------------------------------------------------------------------------

lockss_logo_2_120 images_120. proquest_logo_120

doaj_logo_new_120