Mechanical Engineering Research
| Issue | Title | |
| Vol 2, No 1 (2012) | A Rescue Boat Design Utilizing Reused Plastic Bottles for Accident Preventation | Abstract PDF |
| Danny Faturachman, Shariman Mustafa, Agung Sudrajad | ||
| Vol 2, No 1 (2012) | A Theoretical Characterization of Time Dependent Materials by Using a Hyperlogistic-Type Model | Abstract PDF |
| Marc Delphin Monsia, Yelome Judicael Fernando Kpomahou | ||
| Vol 1, No 1 (2011) | Analysis of the Apparent Viscosity of Starch in Aqueous Suspension within Agitation and Temperature by Using Rapid Visco Analyzer System | Abstract PDF |
| Andrés Antonio Acosta-Osorio, Gilberto Herrera-Ruiz, Posidia Pineda-Gómez, María de los Angeles Cornejo-Villegas, Fernando Martínez-Bustos, Marcela Gaytán, Mario Enrique Rodriguez García | ||
| Vol 2, No 2 (2012) | Bifurcation Onset Delay in Magnetic Bearing Systems with Auxiliary Bearing and Time Varying Stiffness | Abstract PDF |
| M. R. Ghazavi, Q. Sun | ||
| Vol 3, No 1 (2013) | Bridge Concept Design Using Heuristic Fuzzy Optimum Design and FEM | Abstract PDF |
| Heikki Martikka, Erkki Taitokari | ||
| Vol 1, No 1 (2011) | Carbon Nanofiber Reinforced and PU-toughened POM Ternary Composites: Friction, Wear and Creep Properties | Abstract PDF |
| Suchart Siengchin | ||
| Vol 1, No 1 (2011) | Control of Exhaust Emissions from Copper Coated Gasohol Run Two Stroke Spark Ignition Engine with Catalytic Converter | Abstract PDF |
| M. V. S. Murali Krishna, P. V. K. Murthy, S. Narashima Kumar, K. Kishor | ||
| Vol 1, No 1 (2011) | Coupling ALE Technique and Harmonic Parametrization to Describe Concurrent and Successive Elementary Cell Deformations | Abstract PDF |
| Rachele Allena, Denis Aubry | ||
| Vol 2, No 2 (2012) | Crack Detection in Shaft Using Lateral and Torsional Vibration Measurements and Analyses | Abstract PDF |
| Abdualhakim Ahmed Tlaisi, Ayhan Akinturk, Arisi S. Swamidas, Mahmoud R. Haddara | ||
| Vol 2, No 2 (2012) | Crack Detection in Shafts Using Mechanical Impedance Measurements | Abstract PDF |
| Abdualhakim Ahmed Tlaisi, Arisi S. Swamidas, Ayhan Akinturk, Mahmoud R Haddara | ||
| Vol 3, No 1 (2013) | Design analysis of Hub, Rim and Drum in Brake Assembly | Abstract PDF |
| Ramamurti V., Sukumar T., Mithun S., Prabhakar N., Hudson P. V. | ||
| Vol 2, No 1 (2012) | Design of Innovative Web Structures Based on Spider Web Optimality Analysis | Abstract PDF |
| Heikki Martikka, Ilkka Pöllänen | ||
| Vol 2, No 2 (2012) | Design of Perforated Shell Dryings Drums | Abstract PDF |
| Heikki Martikka, Erkki Taitokari | ||
| Vol 1, No 1 (2011) | Designing a Visual Inspection System for Quality Characteristics Dimensions | Abstract PDF |
| Safaa L. Diab, Abedl Halim Bassiuny, Mohammed Hussein, Reham Ahmed | ||
| Vol 3, No 1 (2013) | Development of Underactuated Prosthetic Fingers with Joint Locking and Electromyographic Control | Abstract PDF |
| Bart Peerdeman, Stefano Stramigioli, Edsko E. G. Hekman, Dannis M. Brouwer, Sarthak Misra | ||
| Vol 3, No 1 (2013) | Dynamical Bayesian Significance Testing for Information on Performance Variation of Rolling Bearing for Space Applications | Abstract PDF |
| Xintao Xia, Jiaqi Zhu | ||
| Vol 3, No 1 (2013) | Effects of Surface Tension and General Rotation on the Rayleigh-Taylor Instability of Three-Layer Flow | Abstract PDF |
| G. A. Hoshoudy | ||
| Vol 2, No 2 (2012) | Failure Dependence of High-Rise Frame Shear-Wall Structures under Frequently Occurred Earthquakes and Its Application | Abstract PDF |
| Junfeng Zhu, Yifan Li, Qun Mei | ||
| Vol 2, No 1 (2012) | Finite-element Analysis and Optimization for the Column of Numerically Controlled Triaxial Deep Hole Drilling Machine | Abstract PDF |
| Dezhong Kong, Jingfeng Shen, Baohui Li | ||
| Vol 3, No 1 (2013) | Fluid Flow Investigation through Small Turbodrill for Optimal Performance | Abstract PDF |
| Amir Mokaramian, Vamegh Rasouli, Gary Cavanough | ||
| Vol 3, No 1 (2013) | Fuzzy-Based Adaptive Cruise Controller with Collision Avoidance and Warning System | Abstract PDF |
| Wafa Batayneh, Omar Al-Araidah, Khaled Bataineh, Adnan Al-Ghasem | ||
| Vol 2, No 2 (2012) | Grey Prediction on Rolling Bearing Friction Torque | Abstract PDF |
| Xintao Xia, Tao Ma | ||
| Vol 2, No 1 (2012) | Identification Method for Evolution of Time Series with Poor Information Using Grey System Theory | Abstract PDF |
| Xintao Xia, Yang Lu, Tao Ma, Long Chen | ||
| Vol 1, No 1 (2011) | Improving the Efficiency of Fuel Usage in New Coal Technologies | Abstract PDF |
| Pavel Shchinnikov, Gennadiy Nozdrenko, Oksana Grigorieva, Anna Galanova, Anton Safronov, Alina Franceva, Valentina Muhina | ||
| Vol 2, No 1 (2012) | Influence of Hydraulic and Interference-fit Tool Holders on Tool Wear and Hole Quality in the Drilling of Al-Si Cylinder Heads | Abstract PDF |
| Paulo Sérgio Martins, José Rubens Gonçalves Carneiro, Pedro Brito, Larissa Vilela, Malange Lourenço | ||
| Vol 2, No 2 (2012) | In-piping Magnetic Actuator Capable of Inspection in a Thin Complex Pipe | Abstract PDF |
| Hiroyuki Yaguchi, Kazushige Kamata | ||
| Vol 3, No 1 (2013) | Intensity Analysis of Pretightening Bolt of Turntable Bearing | Abstract PDF |
| Hongbin Liu, Jun Feng, Guoxi Xing, Shuai Zhang, Lei Zhang, Yujun Xue | ||
| Vol 1, No 1 (2011) | Mechanical Efficiency of Planetary Gear Trains: An Estimate | Abstract PDF |
| A. Srinath, G. Yedukondalu, A. Jagadeesh | ||
| Vol 1, No 1 (2011) | Modeling the Nonlinear Rheological Behavior of Materials with a Hyper-Exponential Type Function | Abstract PDF |
| Marc Delphin Monsia | ||
| Vol 3, No 1 (2013) | Natural Convection and Radiation Heat Loss from Open Cavities of Different Shapes and Sizes Used with Dish Concentrator | Abstract PDF |
| R. D. Jilte, S. B. Kedare, J. K. Nayak | ||
| Vol 2, No 1 (2012) | Numerical Simulation and Experimental Verification of Upsetting Temperature Optimization of Aluminium Alloy | Abstract PDF |
| Maros Martinkovic, Maria Kapustova | ||
| Vol 3, No 1 (2013) | Performance Analysis of a Helical Savonius Rotor with Shaft at 45° Twist Angle Using CFD | Abstract PDF |
| Rajat Gupta, Bachu Deb, R. D. Misra | ||
| Vol 1, No 1 (2011) | Petroleum Reservoir Engineering by Non-linear Singular Integral Equations | Abstract PDF |
| E. G. Ladopoulos | ||
| Vol 2, No 1 (2012) | Preview Control of Trajectory Tracking for Servo System Based on Optimal Preview Control Method | Abstract PDF |
| Mohammed M. Saleh All-bail, Yuegang Tan, Liang Li | ||
| Vol 3, No 1 (2013) | Probabilistic Design with Gerber Fatigue Model | Abstract PDF |
| Edward E. Osakue | ||
| Vol 3, No 1 (2013) | Reduction of Wingtip Vortex from Suction at Wingtip | Abstract PDF |
| Sangram Keshari Samal, P. K. Dash | ||
| Vol 1, No 1 (2011) | Research on Birds Flapping-Wing Bionic Mechanism | Abstract PDF |
| Bingbing Liang, Jiankun Cui, Liyang Zhang | ||
| Vol 2, No 2 (2012) | Simulation and Parametric Analysis of Cryogenic Oxygen Plant for Biomass Gasification | Abstract PDF |
| Vaijanath N Raibhole, S N Sapali | ||
| Vol 2, No 1 (2012) | Sliding Mode Control for Uncertain Chaotic Systems with Nonlinear Inputs | Abstract PDF |
| Yongchun Liu, Da Lin | ||
| Vol 2, No 1 (2012) | Study of Virtual Remote Diagnosis System of Printing Equipment | Abstract PDF |
| Xiong Wei, Chikun Gong, Baojiang Du, Jingmin Guo, Changqin Ji | ||
| Vol 2, No 2 (2012) | Surface Grinding Machine Stability Characteristics Limited Prediction | Abstract PDF |
| Yuting Yang, Jianzhong Lin, Shilong Xu | ||
| Vol 2, No 2 (2012) | The Calculations of Evolving Rates Realized with Two of Type Variables in Whole Process for Elastic-Plastic Materials Behaviors under Unsymmetrical Cycle | Abstract PDF |
| Yangui Yu | ||
| Vol 2, No 1 (2012) | The Explicit Algebraic Reynolds Stress Models for Turbulent Flows | Abstract PDF |
| Hoang Pham, Tuyen D. Nguyen | ||
| Vol 2, No 1 (2012) | The Optimization of the Technological Parameters of Precision Die Forging of a Spur Gear Using a Computer Simulation | Abstract PDF |
| Maria Kapustova, Lubos Kravarik, Maros Martinkovic | ||
| Vol 1, No 1 (2011) | The Research of Internet-based Robot Design Platform | Abstract PDF |
| Zhenhua Liu, Jinjie Chen | ||
| Vol 2, No 2 (2012) | The Research of New Type Hydraulic Breaker with Strike Energy and Frequency of Adjusted | Abstract PDF |
| Guoping Yang, Yubao Chen | ||
| Vol 3, No 1 (2013) | Thermo-Mechanical Characterization of Laser Weld 316L(N) Stainless Steel | Abstract PDF |
| D. Harish Kumar, A. Somi Reddy, P. Parameswaran, T. Jaya Kumar, M. Nandagopal, K. Laha, Panneer Selvi, T. Sakthivel, K. Gururaj, G. Padmanabhan | ||
| Vol 2, No 1 (2012) | Underwater Pile Driving Hammer with Active Impact Body | Abstract PDF |
| Petar Bodurov, Vasil Genchev | ||
| 1 - 48 of 48 Items | ||
Mechanical Engineering Research ISSN 1927-0607 (Print) ISSN 1927-0615 (Online)
Copyright © Canadian Center of Science and Education
To make sure that you can receive messages from us, please add the 'ccsenet.org' domain to your e-mail 'safe list'. If you do not receive e-mail in your 'inbox', check your 'bulk mail' or 'junk mail' folders.
------------------------------------------------------------------------------------------------------------------------------
