Study the Effect of CO2 Laser Annealing on Silicon Nanostructures

Ali L. Abed, Bassam G. Rasheed

Abstract


The recent discovery of strong room-temperature photoluminescence from silicon nanocrystals fabricated by different methods is an extremely important scientific breakthrough with enormous technological implications because of possibility of integration of silicon based electronic and optoelectronic devices. This paper the effect of Laser annealing technique used to produce nanoparticales by CW laser was proposed. The laser spot was focused within 0.6 mm beam radius to synthesize silicon rich oxide SiOx nanostructures in silicon nanostructures thin films by laser ablation of silicon target on glass. The CO2­ laser beam λ (10.6µm) with power Plaser ranging from 1 to 10 Watt. Two lasers were employed; the first, Q-switched Nd:YAG laser to prepare an amorphous silicon film on glass substrate and the second, CW CO2 laser beam to produce local heating and synthesize a silicon oxide nanostructures. A sufficient absorbing CO2 laser beam was used to induce local heating at optimizing surface temperature. The optical and surface morphological properties of SiOx films annealed by CO2 laser are primarily investigated the effect of parameters such as power density and elimination time.


Full Text: PDF DOI: 10.5539/mas.v4n12p56

Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

Modern Applied Science   ISSN 1913-1844 (Print)   ISSN 1913-1852 (Online)

Copyright © Canadian Center of Science and Education

To make sure that you can receive messages from us, please add the 'ccsenet.org' domain to your e-mail 'safe list'. If you do not receive e-mail in your 'inbox', check your 'bulk mail' or 'junk mail' folders.