Alteration of the Let-off and Take-up Machine of Loom SAURER 400

Bingyin Liu, Jianjun Sun

Abstract


At present, many shuttleless looms in Chinese enterprises still use the mechanical let-off and take-up machine, and to fulfill the requirements of modern textile technology and consider the factor of saving cost, most enterprises begin to alter their old looms. Taking the rapier loom SAURER400 as the research object, the original let-off and take-up machine of loom SAURER400 was analyzed in the article, and the electric let-off and take-up system was designed, and the revs of the let-off input end and the take-up input end were respectively computed, which could provide some references for the alteration of future electric let-off and take-up control system.


Full Text: PDF DOI: 10.5539/mas.v3n11p75

Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

Modern Applied Science   ISSN 1913-1844 (Print)   ISSN 1913-1852 (Online)

Copyright © Canadian Center of Science and Education

To make sure that you can receive messages from us, please add the 'ccsenet.org' domain to your e-mail 'safe list'. If you do not receive e-mail in your 'inbox', check your 'bulk mail' or 'junk mail' folders.