Recovery of Nickel (Ii) Ions from Electroplating Rinse Water Using Hectorite Clay

V. Ramamurthi, P. Gomathi Priya, S. Saranya, C.Ahmed Basha

Abstract


This paper describes the recovery of Ni (II) from electroplating rinse water using the Hectorite clay. Batch mode adsorption experiments were carried out and the effect of contact time, adsorbent dosage, pH, initial metal ion concentration and temperature were studied. Different isotherms were obtained using nickel electroplating rinse waters of various concentrations. The ion exchange process follows second order kinetics and langmuir isotherm. The paper discusses thermodynamic parameters, including changes in Gibbs free energy, entropy and enthalpy for the ion-exchange of Ni (II) from electroplating rinse water on Hectorite clay, revealed that the ion-exchange process was spontaneous and exothermic under different temperatures. The maximum adsorption capacity obtained was 62.24 mg/g at pH 7-8, the optimum adsorbent dosage and contact time was found to be 2 g/l within 5hours.


Full Text: PDF DOI: 10.5539/mas.v3n9p37

Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

Modern Applied Science   ISSN 1913-1844 (Print)   ISSN 1913-1852 (Online)

Copyright © Canadian Center of Science and Education

To make sure that you can receive messages from us, please add the 'ccsenet.org' domain to your e-mail 'safe list'. If you do not receive e-mail in your 'inbox', check your 'bulk mail' or 'junk mail' folders.