Analysis of Contact Stress between Cylindrical Roller and Outer Ring Raceway with Taper Error Using ANSYS

Xia Xintao, Zhu Shichao, Jia Chenhui, Niu Rongjun

Abstract


Taking a cylindrical roller bearing as a research object, the contact stress between the cylindrical roller and the outer ring raceway with a taper error is studied by means of ANSYS in order to obtain the allowable value of the upper bound of the taper error. The results show that the given load corresponds to the suitable upper bound of the taper error of the outer ring raceway and with the increasing taper error, the contact stresses between the cylindrical roller and the outer ring raceway increase observably and the distribution of the contact stresses presents more complex asymmetry and nonuniformity.


Full Text: PDF DOI: 10.5539/mas.v6n12p86

Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

Modern Applied Science   ISSN 1913-1844 (Print)   ISSN 1913-1852 (Online)

Copyright © Canadian Center of Science and Education

To make sure that you can receive messages from us, please add the 'ccsenet.org' domain to your e-mail 'safe list'. If you do not receive e-mail in your 'inbox', check your 'bulk mail' or 'junk mail' folders.