Study on the Laser Hybrid Cladding Technology on the Surface of Copper Substrate

Fudong Zhu, Yunshan Wang

Abstract


To enhance the staying quality of the surface of the copperplate, the laser hybrid cladding technology can be used to
clad Ni-Cr alloy on the surface of the copperplate. By the traditional laser cladding technology, it is hard to directly
form good coat on the surface of the copperplate. In the article, the coat is made on the surface of the copperplate by the
laser hybrid cladding technology, and the staying quality tests are made for samples by several methods, and the
micro-hardness and the staying quality of the coat are far higher than the cooper substrate, and coat has good roughness
of surface. And the test result indicates that the method adopting the laser hybrid cladding technology can prepare the
alloy coat on the surface of the deep copperplate.

Full Text: PDF DOI: 10.5539/apr.v1n2p68

Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

Applied Physics Research   ISSN 1916-9639 (Print)   ISSN 1916-9647 (Online)

Copyright © Canadian Center of Science and Education

To make sure that you can receive messages from us, please add the 'ccsenet.org' domain to your e-mail 'safe list'. If you do not receive e-mail in your 'inbox', check your 'bulk mail' or 'junk mail' folders.

doaj_logo_new_120 images_120. proquest_logo_120 lockss_logo_2_120 udl_120.